Wednesday, February 13, 2013

Dustless Technologies 16006 16-Gallon Dustless Wet/Dry Vacuum with Hepa Filter, 12-Foot by 1-1/2-Inch Hose Big SALE

Dustless Technologies 16006 16-Gallon Dustless Wet/Dry Vacuum with Hepa Filter, 12-Foot  by 1-1/2-Inch Hose
DUSTLESS TECHNOLOGIES H.E.P.A. Wet/Dry Vacs help recover asbestos, lead dust, and other airborne pollutants. H.E.P.A. vac filtration effectively removes 99.97% of all particles to 0.3 microns. Changes from wet to dry pickup without removing filters. Include: 2 extension wands, crevice tool, utility nozzle, 1 micro prefilter bag, 12' crushproof hose, and 15' cord. Water Lift/Air Flow: 72"/116.59 CFM. 5 hp, 11.5-amp motor. 16-gal. capacity.The Dustless HEPA WET/Dry Vacuum gives contractors a cost-efficient way to control dust at the job site and comply with EPA Lead-Safe regulations. Not only does it have a low initial cost, but also enables users to save money down the road. Using a Micro Pre-filter greatly extends the life of the certified HEPA filter by capturing virtually everything but the smallest particles, down to .5 microns. This cost-saving system is only available through Dustless Technologies.


The 16006
HEPA Wet/Dry Vacuum
At a Glance:
  • Certified HEPA-rated vacuum system
  • Designed to capture fine dust
  • Won't release dust back into the environment
  • No need to change filters for wet vacuuming
  • 100% recommended by Handyman Club of America
Use the Wet/Dry Vac with the optional Dustie Dust Collection Shroud
(sold separately) for controlling dust during hand grinding. View larger.
The certified HEPA filter meets OSHA, EPA and NIOSH guidelines and captures particles down to .3 microns. View larger.


Tested by Handyman Club of America, the 16003 Wet/Dry Vacuum received a 100% approval rating.
Meet EPA Lead-Safe Guidelines
The Dustless HEPA Wet/Dry Vacuum employs a certified HEPA filter to meet EPA RRP lead-safe guidelines. It is certified to IEST-RP-CC001.5 insuring a minimum filtration efficiency of 99.97% at 0.3 micron. Be safe - go Dustless.

Switch from Wet to Dry Operation Without Stopping
Unlike other HEPA vacuums, the Dustless HEPA Wet/Dry Vacuum can be used to vacuum up water without fear of getting your valuable HEPA filter wet. A baffle wall inside the canister keeps water from reaching the HEPA filter, under normal operation. Go back and forth between wet and dry operation without stopping to change filters or make other adjustments.

Quiet and Powerful
The Dustless HEPA Wet/Dry Vacuum emits only 81 decibels of noise and has a powerful motor that runs at 24,140 RPMs that produces 76.9-inch water lift at 126-CFM. The 16 gallon canister and micro pre-filter bag support optimum air flow while holding up to 40 pounds of dirt and debris. Other vacuums lose suction after ingesting just several pounds of dust.

100% Recommended by Handyman Club of America
Tested by Handyman Club of America, the Dustless Technologies 16006 Wet/Dry Vacuum received a 100% approval rating. After using the 16006 in their homes, shops, and jobsites, 13 testers gave the wet/dry vac an overall member rating of 9.3. Performance scored a 10, and rating against similar products was an 8.1.

What's in the Box
1 16 gallon canister, 2 Extension wands, Certified HEPA filter, 1 HEPA filter cover, 1 WunderBag Micro Pre-Filter, 1 Crevice tool, 1 Floor Tool, 1 12 foot hose




With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Dustless?
I purchased this machine based on the specs. Supposedly it is dustless. I used it for vacuuming drywall/mud sanding. I actually had the machine outside of the room so that the exhaust won't disturb the drywall all over the place. I looked outside to see that the machine was coated with a light layer of drywall that I sucked up. The filter was on securely by the manufacturer. I also used the pre-filter bag to help the life of the filter. You can see the drywall dust came from the exhausting ports of the machine. The machine is made with durable plastic. The attachments could have gaskets or something to help seal and secure the vacuum. I'd say this is one of the most powerful vacuums I have used, but it is also 2x the amount. It's light weight and moves easily. I was just disappointed that the dustless claim was not real. Also, there isn't a secondary layer when removing the pre-filter bag from the machine, so you might be getting some dust or debris floating around when...

Click here to read the full review for more information about this product.


Clogs fast with drywall dust
The vacuum is well built and Dustless provides the HEPA individually tested filters that the new EPA regs require. Power is about average for a HEPA vacuum at the start but the filter clog very fast. Plan to try out the new DeWalt which are supposed to have a way to vibrate the filter element to knock the drywall dust off. Some HEPA vacs do this automatically and this feature is going to be on the next vac we buy. This is not the vacuum to use with a drywall sander that is going to produce a lot of gypsum dust.
EPA Vac
This vac has normal pickup power, all plastic with cheap hold down tank clips. For a vac that cost this much money I would expect a better over-all product. There is new approved EPA vac out, not as much money and maybe a better choice.
Dustless Technologies 16006 16-Gallon Dustless Wet/Dry Vacuum with Hepa Filter, 12-Foot  by 1-1/2-Inch Hose
Product Features :
  • Certified to meet EPA lead-safe standards
  • Can switch between wet and dry without stopping
  • Interior baffle wall keeps HEPA filter dry at all times
  • Micro Pre-filter retains its strength when wet
  • Longer lasting HEPA filter when used with Micro Pre-filter

Rating : 4.1 out of 5.0
List Price : $599.00

Available at Amazon : Check Saved Price Now !


No comments:

Post a Comment